SDS PLUS 7/8" x 12" Rebar Cutter
Key Specifications
Drill Bit Size: 7/8 in (decimal equivalent: 0.875)
Overall Length: 12 in
Maximum Drilling Depth: 10 in
Drill Bit Sizes Included: (1) SDS Plus Rebar Cutter
Shank Length: 2 in
Shank Diameter: 7/8 in
Flute Length: 10 in
Number of Flutes: 4
Flute Type: Regular spiral
Drill Bit Point Type: Conventional point
Cutting Direction: Right hand
Impact Rated: No
Measurement System: Fractional inch
Primary Material Application: Concrete
Materials & Finish
Primary Material: Carbide tipped
Finish: Bright (uncoated)
Shank Type: SDS Plus
Tool Compatibility
For Tool Type: Rotary hammer
Intended use: Rebar cutting in concrete with rotary hammers that accept SDS Plus shanks. Not rated for hammer-only impact use as impact rating is No.
Notes & Use Guidance
Designed for cutting rebar and drilling through reinforced concrete; carbide tip and 4-flute spiral provide cutting durability and chip removal.
Maximum drilling depth of 10 in corresponds to the flute length; avoid attempting deeper holes than the flute length to prevent reduced chip clearance and increased wear.
Shank: 2 in SDS Plus allows secure retention in compatible rotary hammers; ensure tool accepts a 7/8 in shank diameter where required.
Not impact rated — verify your rotary hammer’s mode and application. Use appropriate PPE and follow tool manufacturer recommendations for speed, feed, and cooling.
SDS PLUS 7/8" x 12" Rebar Cutter
Key Specifications
Drill Bit Size: 7/8 in (decimal equivalent: 0.875)
Overall Length: 12 in
Maximum Drilling Depth: 10 in
Drill Bit Sizes Included: (1) SDS Plus Rebar Cutter
Shank Length: 2 in
Shank Diameter: 7/8 in
Flute Length: 10 in
Number of Flutes: 4
Flute Type: Regular spiral
Drill Bit Point Type: Conventional point
Cutting Direction: Right hand
Impact Rated: No
Measurement System: Fractional inch
Primary Material Application: Concrete
Materials & Finish
Primary Material: Carbide tipped
Finish: Bright (uncoated)
Shank Type: SDS Plus
Tool Compatibility
For Tool Type: Rotary hammer
Intended use: Rebar cutting in concrete with rotary hammers that accept SDS Plus shanks. Not rated for hammer-only impact use as impact rating is No.
Notes & Use Guidance
Designed for cutting rebar and drilling through reinforced concrete; carbide tip and 4-flute spiral provide cutting durability and chip removal.
Maximum drilling depth of 10 in corresponds to the flute length; avoid attempting deeper holes than the flute length to prevent reduced chip clearance and increased wear.
Shank: 2 in SDS Plus allows secure retention in compatible rotary hammers; ensure tool accepts a 7/8 in shank diameter where required.
Not impact rated — verify your rotary hammer’s mode and application. Use appropriate PPE and follow tool manufacturer recommendations for speed, feed, and cooling.
